* Chaque produit que nous recommandons a été sélectionné et examiné de manière indépendante par notre équipe de rédaction sur la base d'une analyse approfondie des données. Si vous cliquez sur les liens des produits, nous pouvons percevoir une commission sur les achats qualifiés.
Onboard USB interface, for power supply OR debugging, onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
Fast communication, stable and reliable, better compatibility
Cable length 1.2m , DC jack output, OD 5.5mm ID 2.1mm
Chip: Intel 8265AC. Bands: 2.4GHz / 5GHz.
800x480 high hardware resolution; Resistive touch control. IPS technology, high quality and perfect displaying from very wide viewing angle
Dimension: 100mm x 45mm x 21 mm
[Power Over Ethernet] PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
2 voies CSI, au lieu de la précédente voie, lecture facile avec vision binoculaire.
This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory
264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use
When used for Jetson Nano, Supports Ubuntu, single point touch and driver free
[Transmission Distance up to 1.2km] The USB signal can be converted into a balanced differential RS485 signal and the transmission rate is stable. The reliable speed is 300bps ~ 3Mbps, the transmission distance is about 1.2km for RS485, and about 5m for USB
SPI interface, requires minimum GPIO for controlling
It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to JSON, etc
Connector: 4PIN reverse-proof connector
Heatsink for Raspberry Pi CM4 with antenna notch, proper space for antenna section
13.3inch IPS screen,1920x1080 high resolution.Toughened glass capacitive touch panel, 6H hardness.
Color-Coded Header, Easy Expansion.
